customcruisers.com

BMW R Series GS Crashbars & Accessories

BMW R1200GS Crashbars Stainless Steel Engine Guards 2010 & Up

Ztechnik Z7102 BMW R1200GS Engine Guards 2010 & Up BMW R1200GS Crashbars Stainless Steel

BMW R1200GS Ztechnik Z7102 Engine Guards 2010 & Up ZTechnik’s stainless steel Engine Guards will never rust like powder coated steel guards. They are carefully designed to allow clearance for oil changes or valve cover access, so they never need to be removed. Guards attach to the engine mounts – not the engine covers – to protect the engine heads and not destroy them. Integrated top brackets on each guard allow the rider to mount accessory lights, video cameras, or whatever they can imagine!

Satin Finished Stainless Steel

Note: Ztechnik Engine Guards are not compatible with aftermarket exhaust headers, including ZTechnik's. Installing Z7102Engine Guards will not allow for installation of O2 sensor with aftermarket exhaust headers.

BMW R1200GS Crashbars Stainless Steel Engine Guards Up to 2009

Ztechnik Z7102 BMW R1200GS Engine Guards Up to 2009 No Rust! BMW R1200GS Crashbars Stainless Steel Ztechnik Z7101

BMW R1200GS Ztechnik Z7101 Engine Guards Up to 2009 ZTechnik’s stainless steel Engine Guards will never rust like powder coated steel guards. They are carefully designed to allow clearance for oil changes or valve cover access, so they never need to be removed. Guards attach to the engine mounts – not the engine covers – to protect the engine heads and not destroy them. Integrated top brackets on each guard allow the rider to mount accessory lights, video cameras, or whatever they can imagine!

Satin Finished Stainless Steel

Note: Ztechnik Engine Guards are not compatible with aftermarket exhaust headers, including ZTechnik's. Installing Z7101 Engine Guards will not allow for installation of O2 sensor with aftermarket exhaust headers.

Kuryakyn GPS Holder Sat Nav Holder Mobile Phone MP3 Holder Ipod Holder KUR4195

Kuryakyn Universal Gadget Pouch GPS Sat Nav Mobile Phone MP3 Holder KUR4195

Kuryakyn GPS pouch motorcycle Sat Nav Mobile Phone MP3 Holder Ipod Holder KUR4195 Kuryakyn Universal Gadget Pouch KUR419

It's Simple, Its Weatherproof, Its Kuryakyn!

Kuryakyn GPS pouch Sat Nav Mobile Phone MP3 Holder Ipod Holder KUR4195 Protect your portable GPS with the simplest & most versatile weather resistant pouch available. Our new
Gadget Pouch has the ability to accommodate almost any size GPS, cell phone or iPod & can be mounted to the handlebars in seconds without any tools. (See other pictures, includes a secure but easily use strap for installation on handlebars (3/4"-1 3/4" Diameter).

Made by Kuryakyn, a name you can trust to have sense and style.

Touch screen compatible & works with or without Küryakyn accessory mount. Kit includes a foam insert to accommodate smaller GPS units.
Fits: Universal for Bar mounting (3/4” to 1-3/4” Diameter) & Küryakyn accessory mount plates

KUR4195 Universal Gadget Pouch (4-1/4” Tall, 6-1/4” Wide, 3/4” Deep)

ZTechnik motorcycle GPS Accessory Mount: BMW Fairing Mount Z6194

ZTechnik motorcycle GPS Accessory Mount: BMW Fairing Mount Z6194

ZTechnik motorcycle GPS Accessory Mount: BMW Fairing GPS Mount Z6194 BMW Fairing Mount System is designed specifically for the BMW R1200GS. The benefit of this mount system is primarily the location. When an eye level, center location is best for your accessory, this is the mount to use. This also will provide the most wind and weather protection. Installation is simple. Just mount onto the front fairing support above the gauges. Can be mounted left or right of center with single, double or wide plates, or two can be mounted side by side. Perfect for GPS, radar detector or satellite radio. Platform: 3 in. x 2.25 in.

BMW R1200GS R1200GSA Machined Aluminum ZPlug: Large Left Rear Frame Junction

Replace the black plastic frame plug at the left rear frame junction with this beautifully machined aluminum plug. It has a beadblasted, durable hard-anodized grey finish to match the Boxer's cylinder head covers. Precise tolerances and a channeled rubber o-ring ensure a perfect and exact fit.

Kit includes a tool for removing the OEM plastic plug. Complete the look with the Z5360, Z5361 and Z5362 kits!

Material: Machined aluminum with beadblasted finish and hard-anodized color to match the Boxer's cylinder head covers.

BMW R1200GS R1200GSA Machined Aluminum ZPlug: Small Right Rear Frame Junction

Cover the small hole at the right rear frame junction with this beautifully machined aluminum plug. It has a beadblasted, durable hard-anodized grey finish to match the Boxer's cylinder head covers. Precise tolerances and a channeled rubber o-ring ensure a perfect and exact fit.

Includes removal tool for maintenance access. Complete the look with the Z5360, Z5361 and Z5363 kits!

Material: Machined aluminum with beadblasted finish and hard-anodized color to match the Boxer's cylinder head covers.

BMW R1200GS R1200GSA Machined Aluminum ZPlug: Large Right Rear Frame Junction

Cover the large hole at the right rear frame junction with this beautifully machined aluminum plug. It has a beadblasted, durable hard-anodized grey finish to match the Boxer's cylinder head covers. Precise tolerances and a channeled rubber o-ring ensure a perfect and exact fit.

Kit includes a tool for removing the OEM plastic plug. Complete the look with the Z5360, Z5362 and Z5363 kits!

Material: Machined aluminum with beadblasted finish and hard-anodized color to match the Boxer's cylinder head covers.

BMW R1200GS R1200GSA Machined Aluminum ZPlugs: Left/Right Telelever Pivots; Pair

Replace the black plastic frame plugs on the front telelever pivots with these beautifully machined aluminum replacement plugs. They have a beadblasted, durable hard-anodized grey finish to match the Boxer's cylinder head covers. Precise tolerances and channeled rubber o-rings ensure a perfect and exact fit.

Kit includes a tool for removing the OEM plastic plugs. Complete the look with the Z5361, Z5362 and Z5363 kits!

Material: Machined aluminum with beadblasted finish and hard-anodized color to match the Boxer's cylinder head covers.

ZTechnik Mirror Extenders Z5300

Fits R1200GS, R1200R, R1200ST, HP2 Enduro and Megamoto

Give yourself a better view of the road and the vehicles behind you! ZTechnik Mirror Extenders move your bike's mirrors out an additional 2 inches (52mm) on each side, allowing you to see more easily past your shoulders, your passenger and your gear. Competitive extenders only add 1.5 inches (less than 35mm) on each side. This is a great 5-minute do-it-yourself upgrade that you'll appreciate!

Laser cut 3-gauge (.25-inch) steel finished in Satin Black

Kuryakyn Air Force Blaster Sidekick Bike Dryer

Larger picture

Kuryakyn Air Force Blaster Sidekick Bike Dryer Air Force Blaster Sidekick from Metro

Kuryakyn Air Force Blaster Sidekick Bike Dryer The SideKick is a compact, powerful hand held motorcycle dryer that is small enough to put into a saddle bag yet strong enough to dry a bike off in minutes! No more water spots or streaking!
At just over 3 pounds, the all steel SideKick's 1.3 H.P. motor produces a large volume of warm filtered air and is great when at home or on the road.

KURYAKYN K900 AIR FORCE BLASTER M/C DRYER

Larger picture

Air Force Blaster Bike Dryer motorcycle air blaster Kuryakyn Air Force Blaster Bike Dryer greast for drying your bike car etc no water marks!! or chamois arm ache!

Air Force Blaster Bike Dryer motorcycle air blaster Kuryakyn Air Force Blaster Bike Dryer greast for drying your bike car etc no water marks!! or chamois arm ache! The Air Force Blaster with its 4 peak H.P. motor and 2-stage dual fan provides a super high velocity, mildly heated air column that cuts drying time by approximately 75%. A variety of interchangeable tips allow you to control the air velocity for drying large expansive areas like tour trunks and saddlebags, or tight nooks, crannies and "rust magnets" like the heads of Allen head bolts. A long flexible hose, and super tough insulated cord provide ample mobility to maneuver around the bike. This high tech blower keeps washing and drying your ride from being an all afternoon ordeal.

KURYAKYN K903 MASTER BLASTER

Larger picture

Kuryakyn Master Blaster Bike Dryer Master Blaster from Metro great fro drying your vehicle !! no more arm ache or chamois to buy no streaking-

Kuryakyn Master Blaster Bike Dryer Master Blaster from Metro great fro drying your vehicle !! no more arm ache or chamois to buy no streaking- Blast water off your bike or anything wet with this high-speed, 4 H.P. motors) dryer of sturdy, all-steel construction. Features 2 stage dual fan with two speeds and two temperatures. A 10" by 1.5" inch commercial-strength flexible hose makes it easy to dry wet things quickly and re-direct moisture out of crevices. Weighs 16 lbs.

Ztechnik Small Cell Phone/MP3 Holder

Larger picture

GPS mountable phone or small mp3 player holder see our other items ie dual mount top plate (allows 2 items to be fitted to 1 gps mount) or quick release snatch plate for gps- move you item form vehicle to bike etc

Adjustable cradle for mounting small cell phone or I-Pod® ( Nano, Mini or standard). This kit may be mounted directly to any standard top plate or to the Z6202 Quick Change Adapter.

Holds accessories from 1.5 in. (40mm) to 2.8 in. (73mm). Overall height is 3.5 in. (89mm).

Ztechnik Large Cell Phone/PDA/MP3 Holder

Larger picture

New GPS Mountable mobile phone or MP3 palyer holder this is our larger one see our other product for the smaller one plus the double top ( allows 2 items to be used with one GPS mount) or the latest quick release snatch plates adaptable to any items !! allows swopping from vehicle to bike etc .

Adjustable cradle that makes mounting larger cell phones, PDA's and MP3 players safe and easy. Includes pin adapter plate needed to mount onto the Z6202 Quick Change Adapter or Z6201 GPS/XM Top Plate.

Holds accessories 2.4 (60mm) to 3.6 (90mm) in. wide. Overall height is 4.1 in. (104mm).

Ztechnik Small GPS/XM Accessory Top Plate, Black

Larger picture

Accessory Top Plate for mounting a device with the four bolt AMPS bolt pattern used by many GPS and SAT radio manufacturers. Uses rubber expansion nuts to hold device secure and to isolate vibration. Works with Delphi XM Roady, XM Roady II, SkyFi, SkyFi 2, Garmin GPS Cradles, and R.A.M. GPS cradles. Not for mounting any Magellan GPS with nuts built into the back of the unit.
Colour :Anodized Black

Note: Mounts to any TechMount platform, available separately

ZTechnik Accessory Mount; 7/8 in. Handlebar Mount, Black

Larger picture

Motorcycle 7/8 22mm bars GPS mount CNC ally top quality

This 22mm handlebar mount gps bracket is a universal clamp system designed for round tube, 7/8 in. diameter handlebars. The mount requires only 1/2 in. of bar space. The ball and socket design used on this mount allows a wide range of movement, making installation at complex angles possible. The top plate can be rotated 360 degrees, as well as offset left,right or centre.every bike form a bandit to a fireblade! or more exotic off roaders or ducati superbikes too!will also work as radar detector mount . See our double top top allow 2 items to be used at once!
Platform: 3 in. x 2.25 in.

ZTechnik Motorcycle Small GPS/XM Accessory Top Plate, Silver

Larger picture

ZTechnik Motorcycle Small GPS XM Accessory Top Plate, Silver Z6501

ZTechnik Motorcycle Small GPS XM Accessory Top Plate, SilverAccessory Top Plate for mounting a device with the four bolt AMPS bolt pattern used by many GPS and SAT radio manufacturers. Uses rubber expansion nuts to hold device secure and to isolate vibration. Works with Delphi XM Roady, XM Roady II, SkyFi, SkyFi 2, Garmin GPS Cradles, and R.A.M. GPS cradles. Not for mounting any Magellan GPS with nuts built into the back of the unit. Requires ZTechnik Accessory Mount

ZTechnik Accessory Top, Wide, Silver

Larger picture

GPS top plate wide base Ztechnik

The Z6500 Wide Accessory Top allows for the mounting of larger electronic devices, or two small devices side by side. Will work with any ZTechnik Accessory Mount product.

ZTechnik Garmin® XM Antenna Mount, Black

Larger picture

Makes mounting the Garmin XM radio antenna simple. This powder coated steel bracket mounts between the GPS cradle and the Techmount top plate. (GPS/Radio Not included)

ZTechnik Satellite Radio Antenna Mount, Black

Larger picture

Pre-drilled to mount onto any standard TechMount top plate or Z6202 Quick Change Adapter Plate. This bracket provides a secure and compact place to attach your XM radio antenna.(radio not Included)

ZTechnik Four-Pin Accessory Adaptor, Black

Larger picture

GPS Mount top plate mount adaptor CNC top quality

GPS Mount top plate mount adaptor CNC ally For mounting GPS or Satellite radio cradles with four square holes onto a Z6202 Quick Change Adapter Plate or Z6201/6501/6601 Accessory Adapter. (GPS/Radio not included)

ZTechnik Z6400 GPS adaptor plate Single Pin Accessory Adaptor, Black

Larger picture

ZTechnik GPS Satnav adaptor plate Single Pin Accessory Adaptor, Black GPS Top Plate mount square pin pattern |CNC ally - not plastic. Z6400

ZTechnik GPS adaptor plate Single Pin Accessory Adaptor, Black GPS Top Plate mount For mounting GPS or satellite radio cradles with a single square pin onto a Z6202 Quick Change Adapter Plate or Z6201/6501/6601 Accessory Adapter. (GPS/Radio Not included)

ZTechnik GPSMount Quick Change Adaptor Plate

Larger picture

ZTechnik Z6202 GPS Mount Quick Change Adaptor Plate Quick change

ZTechnik Z6202 GPS Mount Quick Change Adaptor Plate The TechMount Quick Change Adaptor Plate is an accessory top that makes changing from one device to another quick and easy. Simply mount your GPS or satellite radio to the Quick Change Adaptor with the supplied hardware and slide it onto any standard TechMount top plate. The adaptor is held securely with one stainless thumbscrew from underneath. Simply remove your device when its not needed and use your Adapter Plate for another device. No tools required and no need to change the top plate. Machined from a solid block of high impact ABS, this Adapter Plate is made to withstand the elements. We have pre-drilled several industry standard mounting holes into the accessory top to make mounting your device simple. It has the AMPS four hole pattern used by Garmin, Magellan, Delphi XM and Sirius. It also has the two- and four-hole patterns used for mounting almost all R.A.M. style cradles.(GPS System not included)
Platform: 3.125 in. x 2.50 in.

Requires Ztechnik Accessory mount ZT-Z6131 (Not Included)

ZTechnik Wide Accessory Top, anodized Black

Larger picture

GPS Mount top plate wide fitting Ztechnik double accessory model cnc ally construction

GPS Plate extra large CNC ally The Z6200 Wide Accessory Top allows for the mounting of larger electronic devices, or two small devices side by side. Will work with any ZTechnik Accessory Mount product.

ZTechnik Accessory Mount; 7/8 in. Handlebar Mount, Black

Larger picture

This ZTechnik Accessory Mount is specially designed for the R1200GS tapered bars, but will fit most bikes with 7/8 in. handlebars. Once in place, it blends seamlessly with the OEM styling of your bike. A compact and versatile mount. Platform: 3 in. x 2.25 in.

ZTechnik Accessory Mount; 7/8 in. Handlebar Mount; Double Top Plates, Anodized Black

Larger picture

This ZTechnik Accessory Mount is specially designed for the R1100/1150/1200GS, but will fit most bikes with 7/8 in. handlebars. Once in place, it blends seamlessly with the OEM styling of your bike. The dual top plates swivel independently. Platform: (2) 3 in. x 2.25 in.

ZTechnik Accessory Mount; 7/8 in. Handlebar Mount, Anodized Black

Larger picture

This is the most versatile product in the ZTechnik Accessory Mount line. Whether you have an F650, an R1150GS, or even an old airhead boxer, the Z6190 will look good and function properly.
Platform: 3 in. x 2.25 in.

ZTechnik Accessory Mount; 7/8 in. Handlebar Mount, Anodized Silver

Larger picture

This ZTechnik Accessory Mount features an anodized silver finish that is designed to look correct on your bike. But it will look great and function beautifully on practically any bike with 7/8 in. handlebars.
Platform: 3 in. x 2.25 in.

ZTechnik Helmet BMW Lock License Plate Frame -

Larger picture

BMW Helmet lock kit from Ztechnik Z5505 made from top qual;ity alloy with twin helmet locks.

BMW HELNMET LOCK NUMBER PLATE KIT Finding a convenient place to store your helmet can be a problem with some bikes. That's why we developed this system to be placed in a very accessible location. When mounted, the frame will hold and lock two helmets using a push-lock locking mechanism that comes with 2 matching keys.

ZTechnik Rear Seat Storage Bag/Carrier

Larger picture

ZTechnik’s extremely versatile 4-liter rear storage compartment is a great addition or alternative to the standard tank bag. Besides its cavernous main compartment, four zippered storage areas (three main areas and one document holder) are attached to a cleverly designed, removable tray. A Velcro® hinge makes removal of the tray a snap.Sturdy double zippers keep everything secured inside while the pod’s web straps and rubber coated hooks attach it to the bike. Thinking ahead, ZTechnik included plenty of length in the web straps to make mounting the bag – under
the seat, to the rear tail cowling, or through a rack– an easy process.. Web straps have vinyl coated hooks to prevent sratching or scuffing your motorcycle's finish. Dimesions: H: 4.5-6 in. W: 9-12.5 in. L:13.75 in.

Scala Rider Helmet Headset Cardo Headset not the older models-latest specs

Now Only

Scala Rider Head Set

Cardo Q2 plus MP3 input not the older models-latest specs at a GREAT Price -Hands Free Mobile Phone Headset & more plus Intercom LATEST SPEC PLUS new MP3 / ipod interface lead INCLUDED!!!

New Q2 Version PLUS MP3 Input - not to be confused with older models this full 2009 specs!! appears cheaper on ebay- but not this latest model! NOW with 4 bluetooth connections possible at same time ie GPS Phone Pillion and another Bike or just GPS and 3 bikes for great touring possibilities all contained in one compact unit that clips to the helmet and is quick release for easy charging in supplied charger you cannot go wrong this even has a built in FM stereo !! the equivalent from Autocomm etc with 4 bluetooth capabilities would cost over £750!! and still not be as compact or wireless! get rid of your old bulky hard wired system and invest in these before the price goes up!!

Hands Free Mobile Phone Headset & Rider to Pillion Intercom plus 2 other blue tooth devices as well !
Weather protected headset- fits open faced and full helmets quick release mount included for open or full face helmets !

Full stereo twin speakers in the helmet plus boom microphone with noise reducing wind sock- made by one of military biggest legendary suppliers- need we say more! latest technology guaranteed!

**************** NOTE 2 are needed for 2 people this is one item not a pair *************

-Self-Installation of entire system within minutes, leaving no traces on helmet
-Upto 7 hours talk time/ 1 week Standby (recharging from any normal output) cigar lighter lead available plus MP3 / Ipod to FM signal allows you to listen to your Itunes etc too- via the fm radio.(Optional extra ) call us for details-=please note the ipod/MP3 lead is included free of charge.

-Hands Free Mobile Phone Headset & Rider to Pillion Intercom
Weather protected headset- fits open faced and full helmets
-Self-Installation of entire system within minutes, leaving no traces on helmet
-Upto 7 hours talk time/ 1 week Standby (recharging from any normal output)

BMW R1150GS - Four-Pin Accessory Adaptor, Black

Larger picture

For mounting GPS or Satellite radio cradles with four square holes onto a Z6202 Quick Change Adapter Plate or Z6201/6501/6601 Accessory Adapter. (GPS/Radio not included)

BMW R1200GS - ZTechnik Accessory Mount; 1 1/8 in. Handlebar Mount, Black

Larger picture

Motorcycle GPS mount or accessory carrier bar mount 1 1/8 dia bars ie BMW R1200C R1200CL etc custom models.

This ZTechnik Accessory Mount is specially designed for the BMW R1200CL or R1200C 1 1/8 " bars , but will fit most bikes with 1 1/8 in. handlebars. Once in place, it blends seamlessly with the OEM styling of your bike. A compact and versatile mount. Platform: 3 in. x 2.25 in.

ZTechnik Mirror Extenders Z5302

Fits G650GS and 2005-07 F650GS Single

Laser cut 3-gauge (.25-inch) steel finished in Satin Black

BMW R1200GS LeverAction Kit Z5200

BMW R1200GS LeverAction Kit Z5200
ZTechnik adds a new twist to a familiar design.
The windshield experts introduce LeverAction, a trick replacement kit that obsoletes the knob-and-nut hardware on the R1200GS windscreen.

ZTechnik wants to enhance every mile you spend on your R1200GS by making your equipment work easier with enhanced functionality. To that end, ZTechnik developed LeverAction, a slick looking, injection molded lever that replaces the chunky rake adjustment knobs.

LeverAction combines the shaft and nut of the traditional windscreen adjustment hardware into a one-piece design, eliminating the possibility of nuts getting loose and falling into your motorcycle. A quick flip of the lever is all it takes to disengage the windscreen -- within seconds you will have your screen in its new position and be back on the road!

ZTechnik's LeverAction Kit works great with both BMW® and ZTechnik windscreens and is made of nylon plastic and stainless steel for long lasting durability and high-tech good looks.

Injection Molded Nylon Plastic with Stainless Steel Hardware.
Direct Replacement for Existing Parts. All Hardware Included.

BMW R1200GSA Mirror Extenders Z5303

For R1200GS Adventure