Harley Davidson Softail Extreme 250 Wide Tyre Kit 1991-2006 5 speed

Performance Machine
Add to cart
  • Description
  • More

Harley Davidson Softail Extreme 250 Wide Tyre Kit fits Softail Bikes 1991-2006 Harley Softail FXST models AND MOST AFTERMARKET CHOPPER SOFTAIL BASED KITS

 KIT INCLUDES: swing arm, 3/4" axle, fender, struts, gaskets, bolts,all you need less wheel and componenets

Instructions includedNOTE  Wheel, Rotor, & Pulley are not included. 1991-1999 Softail will require a 2000 or newer rear brake system. What you see pictured is what you get designed for wheel size 18" x 8.5" which we keep in fat spoke  but is NOT included.

Full Kit less wheel see

Harley Davidson Softail Fat-ass tyre 240 250 kit conversion why buy a BREAKOUT! save £15,000!

Harley Davidson Softail Extreme 250 Wide Tyre Kit fits Softail Bikes 1991-2006 Harley Softail FXST models AND MOST AFTERMARKET CHOPPER SOFTAIL BASED KITS
Note: 
Use with a 18x8.5" rear wheel for 3/4" wheel axle such as PM wheels with hub code 1274F. Not suitable for ABS equipped models.

 Rear fender is supplied without holes FOR CUSTOM DRILLING TO YOUR SPECS

 USES A 3/4" AXLE

 Designed to work with a 240 Metzeler or 250 Avon wide tire SPINDLE  is 3/4 inch

 KIT INCLUDES: swing arm, 3/4" axle, fender, struts, gaskets, bolts,all you need less wheel and componenets

Instructions includedNOTE  Wheel, Rotor, & Pulley are not included. 1991-1999 Softail will require a 2000 or newer rear brake system. What you see pictured is what you get designed for wheel size 18" x 8.5" which we keep in fat spoke  but is NOT included.

SEE HERE a Performance machine PHAT-ASS kit these are the ultimate as example of how it works-Mike !

The kit here is for a different model but goves you the idea ! this is 2007 up kit  very simple whereas the Evos and softails pre 2007 you have to extend the output shaft  on transmission which is a bigger job or offset the primary  instead on 91-199 evo ,2000 up softails must have th gearbox output shaft extended too-

Harley Davidson Softail Extreme 250 Wide Tyre Kit fits Softail Bikes 1991-2006 Harley Softail FXST models AND MOST AFTERMARKET CHOPPER SOFTAIL BASED KITS

 This awesome  swing arm kit is one of the easiest wide tire conversion kits for Softail. These kits bolt into stock Softail frames on 1991 to 2006 5 speed models and allow the installation of a 250 wide rear tire on a 8.50" wide wheel. These very complete kits include all parts needed to offset the primary and leave the engine and transmission in the stock position. Only the complete primary is mounted offset by means of an included engine to primary spacer, a spacer behind the alternator rotor and an offset drive pulley. The only "modification" that is to be made to the stock frame is cutting off the existing fender struts and replacing them with the included chrome billet aluminum ones. Kits include a black swingarm, chrome 3/4" (19.05mm) diameter rear axle, black axle covers, stainless steel splash guard, chrome belt guard, swingarm pivot bearings, raw steel rear fender, billet aluminum fender struts, billet aluminum primary spacers, offset drive pulley and stainless steel spacers for the compensator sprocket and clutch, all required hardware, gaskets and seals. Kits are designed for use with the stock final drive belt. Because of the very wide choice in wheel designs, the wheel and tire must be ordered separately.
Note: 
Use with a 18x8.5" rear wheel for 3/4" wheel axle such as PM wheels with hub code 1274F. Not suitable for ABS equipped models.Rear fender is supplied without holes FOR CUSTOM DRILLING TO YOUR SPECS

 USES A 3/4" AXLE

 Designed to work with a 240 Metzeler or 250 Avon wide tire SPINDLE  is 3/4 inch

 KIT INCLUDES: swing arm, 3/4" axle, fender, struts, gaskets, bolts,all you need less wheel and componenets

Instructions includedNOTE  Wheel, Rotor, & Pulley are not included. 1991-1999 Softail will require a 2000 or newer rear brake system. What you see pictured is what you get designed for wheel size 18" x 8.5" which we keep in fat spoke  but is NOT included.

!